Due to the situation with the coronavirus, we are currently operating with a reduced workforce.

We have partially resumed operations to support our distributor and direct partners, who supply essential products and services to end users in this unprecedented fight against COVID-19.

We are working hard to respond to your orders and queries and will get back to you as soon as possible.

Waiting times may be longer at the moment so please feel free to contact us at www.starrett.co.uk/contact

Deep Cut Bi Metal Hole Saw

The Deep Cut saw combines the tried and tested tooth form from the previous Dual Pitch product, with a new tooth material for enhanced heat and wear resistance.

The Deep Cut saw also features an increased hole saw depth of 51mm (2”), and is ideal for cutting metal of more than 3mm thickness, tubes with a wall thickness of greater than 3mm and wood up to 51mm (2”) thick.



Features & Product Video

  • Aggressive material penetration and kerf clearance.
  • Ideal for solid materials or tubes of a wall thickness greater than 3mm.
  • 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube.
  • New tooth material for enhanced heat and wear resistance and greater product life.
  • 51mm (2”) hole saw depth – requires arbors with an extended length pilot drill (e.g. A1E, A2E or A17-38E etc.).

Recommended Arbors

Please see below links to the arbors that we would recommend for this product. These are our standard arbors, please click here to visit the arbor page and view our complete arbor range.

Click the catalogue number in the table to visit the page for that product.

Cat No Fits Hole Saw Diameter mm / inch Shank Size mm / inch
A1E
14 - 30mm / 9/16 - 1.3/16" 8.75mm / 11/32" Hex
A2E 
32 - 210mm / 1.1/4 - 8.9/32" 11mm / 7/16" Hex
A4E
14 - 30mm / 9/16 - 1.3/16" 6.5mm / 1/4" Hex
A10E
32 - 210mm / 1.1/4 - 8.9/32" 8.75mm / 11/32" Hex

Reviews

" Fantastic bit of kit"

" worked a treat couldn't be better, would do business with you again. what more do you need?